Stone processing machinery for the finished part.

Plan slab cutting, edge molding and polishing around material thickness, finish, shape and acceptable visible-edge quality.

Slab sizing and shaped parts
Profiling, molding and polishing
Single machines or coordinated lines

See the process Request a configuration

Marble & natural stone Stone cutting machinery for marble and natural stone

01Material review

02Process match

03Output check

PROCESS DEFINITION

Choose the equipment around the final part.

A machine recommendation becomes useful only after the material, finished geometry, visible-edge standard and target output are clear.

Plan slab cutting, edge molding and polishing around material thickness, finish, shape and acceptable visible-edge quality. The final configuration should be confirmed against actual samples, drawings, working sizes and available utilities.

Material type, finish and thickness range
Maximum incoming slab or workpiece size
Finished drawing and visible-edge requirement
Required pieces or linear metres per shift
Power, water, handling and factory-space limits

PROCESS ROUTE

Build a controlled handoff between operations.

Keep the process sequence visible so each machine solves a defined task rather than creating a bottleneck downstream.

Prepare the material

Confirm slab or part size, thickness, surface condition and handling route.

Cut and shape

Choose the cutting, profiling or molding operation matched to the finished geometry.

Finish and inspect

Set the edge, surface and dimensional checks before packing or installation.

Balance the line

Match feed, operators and transfer points to the required daily output.

RELEVANT MACHINE FAMILIES

Compare the process before choosing a model.

Each category opens the editable Yongtao product catalogue with specifications, images and individual machine details.

STAGE 01 · CUTTING

Stone Cutting Machines

For marble, granite and natural-stone slab sizing and shaped parts.

View matching machines →

STAGE 02 · PROFILING

Stone Molding Machines

For repeat decorative strips, profiles and production-line shaping.

View matching machines →

STAGE 03 · FINISHING

Stone Polishing Machines

For smooth surfaces and stable factory finishing.

View matching machines →

FINISHED PRODUCTS

Use the output to set the quality standard.

Set test criteria around the actual product, not a generic machine demonstration.

Wall and floor stone

Match cutting and visible-edge finish to the installation route.

Decorative profiles

Repeat shape and polishing sequence across strips and trims.

Architectural parts

Set dimensions, handling and inspection around the final drawing.

Stone furniture pieces

Plan cuts, openings, profiles and packing protection together.

BUYING QUESTIONS

Questions to resolve before quotation.

Send a drawing and representative material when the visible finish or fit is critical.

Can one machine cover cutting and polishing?

It depends on the finished product and output. Separate processes are often more stable when cutting, profiling and polished edges all need repeatable quality.

Which material information is needed first?

Send the material name, thickness range, maximum size, surface finish and a representative drawing or photo of the finished product.

Can Yongtao configure a complete line?

Yes. Yongtao can recommend the sequence around processing requirements, output targets and on-site conditions.

TALK TO YONGTAO

Bring the material. We’ll plan the process.

Send your material, maximum size, thickness, finished drawing, daily output and destination voltage for a matching configuration.

Request a process proposal →